Quantcast

[puredyne] make live cd problem?

classic Classic list List threaded Threaded
3 messages Options
enrike enrike
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

[puredyne] make live cd problem?

hi

i am trying to make a live usb out of the latest DVD iso using
make-live-device.sh but when I reboot from the USB I just get into a
grub console.

I am using the latest source like this as described here
http://en.wikibooks.org/wiki/Puredyne/Creating_a_live_USB_stick

bzr branch lp:bouilloncube
cd ~/bouilloncube/sh/grub2/
sudo ./make-live-device.sh
~/Desktop/puredyne-911-carrot_and_coriander-DVD-i386.iso /dev/sdb

anything wrong?
thanks

enrike

---
[hidden email]
http://identi.ca/group/puredyne
irc://irc.goto10.org/puredyne
Claude Heiland-Allen Claude Heiland-Allen
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: [puredyne] make live cd problem?

altern wrote:

> hi
>
> i am trying to make a live usb out of the latest DVD iso using
> make-live-device.sh but when I reboot from the USB I just get into a
> grub console.
>
> I am using the latest source like this as described here
> http://en.wikibooks.org/wiki/Puredyne/Creating_a_live_USB_stick
>
> bzr branch lp:bouilloncube
> cd ~/bouilloncube/sh/grub2/
> sudo ./make-live-device.sh
> ~/Desktop/puredyne-911-carrot_and_coriander-DVD-i386.iso /dev/sdb
>
> anything wrong?

Can you paste the complete output of make-live-device.sh?
Hard to tell what might be going wrong without that info.
Thanks!


Claude

---
[hidden email]
http://identi.ca/group/puredyne
irc://irc.goto10.org/puredyne
enrike enrike
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: [puredyne] make live cd problem?

al., 2010.eko apiren 05a 15:00(e)an, Claude Heiland-Allen(e)k idatzi zuen:

> altern wrote:
>> hi
>>
>> i am trying to make a live usb out of the latest DVD iso using
>> make-live-device.sh but when I reboot from the USB I just get into a
>> grub console.
>>
>> I am using the latest source like this as described here
>> http://en.wikibooks.org/wiki/Puredyne/Creating_a_live_USB_stick
>>
>> bzr branch lp:bouilloncube
>> cd ~/bouilloncube/sh/grub2/
>> sudo ./make-live-device.sh
>> ~/Desktop/puredyne-911-carrot_and_coriander-DVD-i386.iso /dev/sdb
>>
>> anything wrong?
>
> Can you paste the complete output of make-live-device.sh?
> Hard to tell what might be going wrong without that info.
> Thanks!

here it goes. i think the error might be this line?
cat: /usr/share/bouilloncube/sh/grub2/grub.cfg.in: No such file or directory



$ sudo ./make-live-device.sh
zsh: exit 1     sudo ./make-live-device.sh
(~/bouilloncube/sh/grub2) % sudo ./make-live-device.sh
/home/r2d2/Desktop/puredy
ne-911-carrot_and_coriander-DVD-i386.iso /dev/sdb
[sudo] password for r2d2:
[?] Are you sure your target is /dev/sdb ? (y/n)y
[*] mounting ISO
[*] ISO file is 1213 MB
[*] force unmounting partitions from /dev/sdb
umount: /dev/sdb: not mounted
[*] erasing target's partition table
umount: /dev/sdb: not mounted
[*] creating system partition of 1313 MB
[*] force unmounting partition /dev/sdb1
umount: /dev/sdb1: not mounted
mke2fs 1.41.9 (22-Aug-2009)
Filesystem label=puredyne
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
80160 inodes, 320548 blocks
16027 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=331350016
10 block groups
32768 blocks per group, 32768 fragments per group
8016 inodes per group
Superblock backups stored on blocks:
         32768, 98304, 163840, 229376, 294912

Writing inode tables: done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 28 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
[*] copying live folder
[*] grub configuration
[*] device ID is  450f7c11-ebe0-4e6e-9fe8-a9d2681c3998
Installation finished. No error reported.
This is the contents of the device map
/mnt/make-live-device/boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install'.

(hd0)   /dev/sda
(hd1)   /dev/sdb
cat: /usr/share/bouilloncube/sh/grub2/grub.cfg.in: No such file or directory
cp: cannot stat
`/usr/share/images/desktop-base/grubsplash-puredyne-logo-simple.png': No
such file or directory
/mnt/make-live-iso ~/bouilloncube/sh/grub2
`live/' -> `/mnt/make-live-device/live'
`live/filesystem.squashfs' ->
`/mnt/make-live-device/live/filesystem.squashfs'
`live/initrd.img' -> `/mnt/make-live-device/live/initrd.img'
`live/memtest' -> `/mnt/make-live-device/live/memtest'
`live/packages.txt' -> `/mnt/make-live-device/live/packages.txt'
`live/parameters.txt' -> `/mnt/make-live-device/live/parameters.txt'
`live/vmlinuz' -> `/mnt/make-live-device/live/vmlinuz'
`LICENSE' -> `/mnt/make-live-device/LICENSE'
`extra' -> `/mnt/make-live-device/extra'
`extra/grub' -> `/mnt/make-live-device/extra/grub'
`extra/grub/grub.cfg' -> `/mnt/make-live-device/extra/grub/grub.cfg'
`extra/grub/menu.lst' -> `/mnt/make-live-device/extra/grub/menu.lst'
`extra/grub2' -> `/mnt/make-live-device/extra/grub2'
`extra/grub2/98_puredyne-live' ->
`/mnt/make-live-device/extra/grub2/98_puredyne-live'
`extra/grub2/99_puredyne-iso' ->
`/mnt/make-live-device/extra/grub2/99_puredyne-iso'
`extra/grub2/README.puredyne-live' ->
`/mnt/make-live-device/extra/grub2/README.puredyne-live'
`md5sum.txt' -> `/mnt/make-live-device/md5sum.txt'
`pure.seed' -> `/mnt/make-live-device/pure.seed'
`README' -> `/mnt/make-live-device/README'
~/bouilloncube/sh/grub2 /mnt/make-live-iso
[*] cleaning up, unmounting and ...
umount: /dev/sdb: not mounted
umount: /dev/sdb1: not mounted
umount: /dev/sdb2: not mounted
[*] ...done.


---
[hidden email]
http://identi.ca/group/puredyne
irc://irc.goto10.org/puredyne
Loading...